Thanks Gavin! One general question: why would I want to put a microATX MB into a standard tower chassis? Doesn't that defeat the purpose of "micro"ATX?
It means it's ATX-compatible (i.e. screw holes, I/O placement). "Standard tower chassis" doesn't have to mean full ATX size.
Nevertheless, I don't think it's that uncommon to mount an mATX mobo in a full size ATX case. For many reasons. You may not need the extra PCIe slots that an ATX-size gives you, but you may still want to use all 8 SATA ports.
Appreciate (and know about) the compatibility, but I found that microATX boards usually command a premium over an otherwise equivalent ATX board, plus the larger board makes installation of components a bit easier. But yes, if I have a microATX board that needs a home and I have an unused standard tower lying around, why not?
Server boards often come in mATX and mITX formats. Nothing special about it. Smaller size means they fit in more rack units.
On the other hand, full ATX for PCs was unnecessary large even when consumers still used many PCI slots. Today it's just archaic. mATX should be the "standard" form factor.
There's no premium for mATX. It's basically the same design as ATX - just with more PCB and slots.
I think you need to go back and look at how little free space was on older ATX boards, it wasn't overkill in the days before 12 layer PCBs and everything surface mount, when processor chipsets were a 2 chip solution, the best drive interface you had was IDE, etc. Manufacturers weren't jacking up board area just to sell you bare FR4.
I ended up in that sort of situation once. Texas summers made me rethink large, high wattage/high heat output computer hardware for the purpose of something as trivial as entertainment so I pulled apart my full ATX tower and ended up with an ITX board with a VIA C3 based system in the same case. It wasn't prudent or cost effective to get a more suitable case as this was an exercise in bringing energy efficiency and cooling cost reductions to amusement. Worked out great too, but now I just stick to low wattage small cores like Bay/Cherry Trail in 11 inch laptops instead of wasting time with archaic desktop hardware.
Make money online from home extra cash more than $18k to $21k. Start getting paid every month Thousands Dollars online. I have received $26K in this month by just working online from home in my part time.every person easily do this job by just open this link and follow details on this page to get started… WWW.iⅭash68.ⅭＯⅯ
Optane DCPMM support might have been the one thing Intel offers that could have tempted me to look at a Xeon system instead of building a Threadripper, except, as someone building a home workstation myself, good luck trying to actually buy one of those. I'll make due w my Optane U.2 for now, and get a PCIe 4.0 Alder Stream when those finally come out. With just 4 slots on this board, I'm not sure DCPMM support really makes sense anyway.
We’ve updated our terms. By continuing to use the site and/or by logging into your account, you agree to the Site’s updated Terms of Use and Privacy Policy.
Facebook
Twitter
RSS
8 Comments
Back to Article
eastcoast_pete - Thursday, May 14, 2020 - link
Thanks Gavin! One general question: why would I want to puta microATX MB into a standard tower chassis? Doesn't that defeat the purpose of "micro"ATX?
notb - Thursday, May 14, 2020 - link
It means it's ATX-compatible (i.e. screw holes, I/O placement)."Standard tower chassis" doesn't have to mean full ATX size.
Nevertheless, I don't think it's that uncommon to mount an mATX mobo in a full size ATX case. For many reasons.
You may not need the extra PCIe slots that an ATX-size gives you, but you may still want to use all 8 SATA ports.
eastcoast_pete - Thursday, May 14, 2020 - link
Appreciate (and know about) the compatibility, but I found that microATX boards usually command a premium over an otherwise equivalent ATX board, plus the larger board makes installation of components a bit easier. But yes, if I have a microATX board that needs a home and I have an unused standard tower lying around, why not?notb - Thursday, May 14, 2020 - link
Server boards often come in mATX and mITX formats. Nothing special about it. Smaller size means they fit in more rack units.On the other hand, full ATX for PCs was unnecessary large even when consumers still used many PCI slots. Today it's just archaic. mATX should be the "standard" form factor.
There's no premium for mATX. It's basically the same design as ATX - just with more PCB and slots.
rrinker - Friday, May 15, 2020 - link
I think you need to go back and look at how little free space was on older ATX boards, it wasn't overkill in the days before 12 layer PCBs and everything surface mount, when processor chipsets were a 2 chip solution, the best drive interface you had was IDE, etc. Manufacturers weren't jacking up board area just to sell you bare FR4.PeachNCream - Thursday, May 14, 2020 - link
I ended up in that sort of situation once. Texas summers made me rethink large, high wattage/high heat output computer hardware for the purpose of something as trivial as entertainment so I pulled apart my full ATX tower and ended up with an ITX board with a VIA C3 based system in the same case. It wasn't prudent or cost effective to get a more suitable case as this was an exercise in bringing energy efficiency and cooling cost reductions to amusement. Worked out great too, but now I just stick to low wattage small cores like Bay/Cherry Trail in 11 inch laptops instead of wasting time with archaic desktop hardware.judithesanchez68 - Thursday, May 28, 2020 - link
Make money online from home extra cash more than $18k to $21k. Start getting paid every month Thousands Dollars online. I have received $26K in this month by just working online from home in my part time.every person easily do this job by just open this link and follow details on this page to get started… WWW.iⅭash68.ⅭＯⅯhubick - Friday, May 15, 2020 - link
Optane DCPMM support might have been the one thing Intel offers that could have tempted me to look at a Xeon system instead of building a Threadripper, except, as someone building a home workstation myself, good luck trying to actually buy one of those. I'll make due w my Optane U.2 for now, and get a PCIe 4.0 Alder Stream when those finally come out. With just 4 slots on this board, I'm not sure DCPMM support really makes sense anyway.