Anand Tech Report Card Rating
95/A

The Good

The calming blue color of the box the TI5VG+ comes in is no indication of the punch this board packs, not only in terms of performance and reliability, but even more so in terms of the overall experience the TI5VG+ will leave you with.  Take a look at all of the weaknesses of the other Super7 motherboards out on the market today, eliminate 90% of them, and you have the TI5VG+.  Let's put that theory to the test, the ATX form factor of the MVP3 based TI5VG+ leaves enough room for all expansion slots to accept full length cards without developing outrageous case requirements like some BX motherboards.  The standard sized ATX board features a full 5 PCI slots, 2 ISA, and 1 AGP completing the overall expansion picture with 3 DIMM and 2 SIMM slots for memory.  Courtesy of the MVP3 chipset the Memory Bus may run pseudo-synchronously with the clock of the AGP Bus, or dependently with the Front Side Bus (FSB) speed.  This feature, unique to VIA's MVP3 chipset, allows you to reuse your old 60ns EDO SIMMs or even lower quality non-PC100 SDRAM that failed at the 100MHz bus speed while getting the full advantages of the 100MHz FSB since your RAM will be running at around 66MHz, a huge difference to the cost of an entire Super7 upgrade if you happen to have some older RAM laying around.

TMC makes the board available in 2 flavors, one with a 1MB Level 2 Cache, a feature which isn't so much of a performance option rather a convenience feature, the other with a standard 512KB L2 Cache.  This translates into a 256MB cacheable memory area for the 1MB board and a 128MB cacheable memory area for the 512KB board, if you plan on using above 128MB and want to get the maximum performance out of your system you are better off waiting for the 1MB version otherwise, you'll experience a nice little dose of degraded performance when using all RAM above the cacheable memory limit. 

Taking a closer look at the motherboard reveals that TMC managed to eliminate a very common problem with Super7 motherboards, especially those based on the MVP3 chipset, the complex jumper configuration.   Instead of using multiple sets of jumper blocks scattered all over the motherboard TMC made use of 2 sets of unobstructed Dip Switches, making the initial configuration and setup of the TI5VG+ easier than any other Super7 motherboard AnandTech has reviewed thus far.  The settings are so easy to follow in fact, you don't really need the manual to setup your system so long as you have a little experience in this sort of upgrade under your belt, since the proper FSB, Clock Multiplier, and Voltage settings are clearly documented on the motherboard itself.  If you don't feel comfortable relying on the motherboard itself there is an outstanding User's Manual which accompanies the TI5VG+ that will help you every step of the way.

The 100MHz FSB on the board proved to be beneficial to the face of the AMD K6-2 as it produced Pentium II - level Winstone marks in the tests AnandTech ran on the motherboard.  The performance of the board overall was pretty much average for a Super7 board, and above average for a Super7 motherboard equipped with only 512KB of L2 cache.  For those of you looking for a down right decent ATX Super7 motherboard that actually offers some room for expansion, you may want to give the TMC TI5VG+ a good look...or two.

The Bad

PCI is the future, for those of you that are still clinging on to the ISA bus you may want to pass this opportunity up as the TI5VG+'s 2 ISA slots aren't enough for many strong ISA-buffs, at the same time this may be the perfect time to grab PCI versions of your old ISA peripherals, the final decision is yours, but just be sure that the 2 ISA slots accommodate your needs.  In order to place the memory expansion slots next to the ATX I/O Back Plate TMC had to shift the standard ATX motherboard design around just a bit, this required that the CPU Socket be placed closer to the Hard Drive cage in your case, therefore away from the path of the ATX cooling fan.  In lieu of this, be sure to have adequate cooling of your processor as well as the rest of the case to prevent any thermal issues from popping up at the most inappropriate of times.  Another result of the layout-shift is the awkward location of the Floppy Drive connector, which is placed next to the ATX Power Supply connector near the SIMM slots, a position that can pose problems for large cases which place the floppy drive at the top of the case, be sure to have a long floppy cable handy if you are one of the lucky few blessed with a massive ATX tower. 

A [functional] 112MHz bus speed setting would have been nice, and the lack of a 90MHz setting does subtract from the overall control you'll have over the speeds you can overclock your processor to, in spite of this the TI5VG+ is still a very overclockable motherboard.  If you can pick up a K6-2 266 have fun running it at 100 x 3.0 since that setting will most likely give you no troubles at all.

• Allows user to individually set IRQs for each Legacy ISA card

• Allows user to assign IRQ for USB

• Allows user to assign IRQ for VGA card

Recommended SDRAM

Recommended SDRAM: AMM PC100 SDRAM, Azzo PC100 SDRAM, Corsair PC100 SDRAM; Memory Man PC100 SDRAM
SDRAM Tested: 1 x 64 AMM PC100 SDRAM, 1 x 64 Azzo PC100 SDRAM, 1 x 64MB Corsair PC100 SDRAM; 1 x 64MB Memory-Man PC100 SDRAM

Manufacturer: Advanced American Megatrends Technologies
Purchase Web-Site: http://www.megacom.com

Manufacturer: Azzo Computers
Purchase Web-Site: http://www.azzo.com

Manufacturer: Corsair Microsystems
Purchase Web-Site: http://www.tccomputers.com/

Manufacturer: The Memory Man
Purchase Web-Site: http://www.memory-man.com

The Test

In recent times, choosing a motherboard cannot be completely determined by a Winstone score. Now, many boards come within one Winstone point of each other and therefore the need to benchmark boards against each other falls. Therefore you shouldn't base your decision entirely on the benchmarks you see here, but also on the technical features and advantages of this particular board, seeing as that will probably make the greatest difference in your overall experience.

How I Tested

• Each benchmark was run a minimum of 2 times and a maximum of 5 times, if the motherboard failed to complete a single test within the 5 allocated test runs the OS/Software was re-installed on a freshly formatted Hard Drive and the BIOS settings were adjusted to prevent the test from failing again.  All such encounters were noted at the exact time of their occurrence.

• Business Winstone 98 was run at each individually tested clock speed, if reliable scores were achieved with the first two test runs of the suite an average of the two was taken and recorded as the final score at that clock speed.  If the test system displayed erratic behavior while the tests were running or the results were incredibly low/high the tests were re-run up to 5 times and an average of all the test runs was taken and recorded at the final score at that clock speed

• After each motherboard was tested a complete format of the test hard drive was initiated and the OS/benchmarking software was re-installed afterwards a defragment was initiated using Windows 95's Disk Defragmentation Utility

• Tests using AGP Video cards were only run under Winstone 97, as the AGP Millennium II does not affect the Business Winstone 98 score when compared to the PCI Millennium II used in the tests.

• No foreign drivers were present in the test system other than those required for the system to function to the best of its ability

• All foreign installation files were moved to a separate partition during the test as to prevent them from effecting the test results

• All tests were conducted at 800 x 600 x 16-bit color depth

NOTE: Do not compare these scores to older benchmarks results at AnandTech as the configuration of these tests differs (HDD and Video Mode)

The Final Decision

Until California Graphics ships its Photon 100 MVP3 board, the king of the ATX Super7 hill seems to be the TMC TI5VG+, for now at least.   If you absolutely must have a Super7 motherboard now, and the specs agree with your desires, drop on by www.grumpmicro.com and place an order for one of these babies.  The best thing to do know would be to wait, however I know how tempting new technology can be...if you can hold out just another week or two you will greatly benefit in the long run.